Health & Medical

DISPOSABLE N95 / FFP2 / IS 9473* MASKS

SUPPORT LAYER : Spun Bond non-woven fabric

MASK INNER LAYER : Hydrophilic Layer 

MASK OUTER LAYER   : Hydrophobic non-woven Polypropylene

FILTER LAYER : Electrostatically charged Melt Blown Layer (35 GSM) 

NOSE STRIP is provided to ensure there are no gaps on either side of the mask

EAR LOOPS are provided to secure the masks behind the head

The National Institute for Occupational Safety and Health (NIOSH) has laid down standards to measure the performance, efficacy, and conformance of N95 Masks.

In the European Union the EN 149 Standard is laid down to measure the performance of masks conforming to the FFP2 Grade.

Bureau of Indian Standards (BIS) is the National Standard Body of India for the harmonious development of the activities of Standardization.

IS 9473:2002 is the standards for Respiratory Protective Devices.

IS 9473 masks meet the specifications of N95 / EN 149 FFP2

 SPECIFICATION TABLE

Product : N95 / FFP2 / IS 9473* MASKS

Protection Class : N95 / FFP2 / IS 9473*

Material : Non-woven Fabric

Colour : White

Fluid Resistant : No

Particulates Filtration Efficiency : ≥ 95% @ 0.3 micron

Breathability – Delta P (mm H20/cm²) : <5

Flammability : Class 1

Exhalation Valve : No

SURGICAL FACE MASK WITH MELT-BLOWN FILTER LAYER

SURGICAL FACE MASK WITH MELT-BLOWN FILTER LAYER

Disposable Surgical Face Masks with Electrostatically Charged Non-Woven Melt-Blown Filter Layer

Each of our masks are manufactured to conform to the ASTM F2100 – 11 Standards Level 2. World over this is recognised as the de facto classification for Medical Grade Surgical Masks.

 SPECIFICATION TABLE

Product : Surgical Face Mask

Type : Melt-Blown Filter Layer

Colour : Blue

Fluid Resistance : 120 mm Hg

Bacterial Filtration Efficiency : ≥98%

Particulates Filtration Efficiency : ≥98% @ 0.1 micron

Breathability – Delta P (mm H20/cm²) : <5

Flammability : Class 1

Attachment Design : Vertical Ties

Mask Construction : Sonic Welded

IV Cannula/Intravenous Catheter/Peripheral perfusor

IV Cannula/Intravenous Catheter/Peripheral perfusor:

iv cannula | intravenous catheter | peripheral venous | JK MEDIRISE | Cánula iv | Catéter intravenoso | Venoso periférico | Canule iv | Cathéter intraveineux | Veine périphérique | Iv канюля | Внутривенный катетер | Периферический венозный | قنية الرابع | القثطرة الوريدية | الطرفية الوريدية

Bevel type needle for easier less traumatic insert. Thin Wall FEP catheter with X- Ray opaque line.

Flexible and kink resistant catheter is double tapered with rounded tip for smooth introduction and minimum discomfort to the patient.

Injection port with one way valve and color coded cap for intermittent and safe administration of drugs during infusion.

Flexible wings provide easy and secure fixation and also prevent skin contact with luer lock connector.

High transparent flash back chamber for an easy view of returning blood.

Luer lock cap for closing the proximal end of the catheter after removing the needle.

Individual blister pack & ETO Sterilization

Available in 14G,16G,18G,20G,22G,24G,26G Sizes